Scaffold mesh banners and scaffold wraps
A scaffold banner is a printed mesh panel tied to scaffolding, site fencing or hoarding. We print them to any finished size at £1.80 per square foot. An 8 ft × 4 ft panel is £57.60 to print, or £64.59 delivered. Order one panel, or several of the same size to cover a longer run.
Work out your size and price
Enter the finished width and height of one panel, and how many panels you need. The calculator shows the print price and standard delivery separately, then puts that size into the order form at the top of this page.
Worked example: 8 ft × 4 ft is 32 square feet. 32 × £1.80 = £57.60 print, plus £6.99 UK delivery = £64.59 delivered. Two panels are £115.20 to print, and because delivery is charged once per order, both arrive for £122.19.
Finished dimensions
- Order the finished size. The width and height you enter are the size we make the banner.
- Measure the bay or panel. Measure the scaffold bay, fence panel or stretch of hoarding the banner will cover, then take a few centimetres off each way so it can be pulled flat with ties.
- Smallest size. 1 ft × 1 ft (30.5 × 30.5 cm). You can enter sizes in millimetres, centimetres, inches, feet or metres.
- Long runs. For a long run of scaffold or fencing, order several panels of the same size. Panels are easier to carry, hang and replace than one very long banner.
The sizes and prices table below lists our standard sizes, from 4 ft × 2 ft at £14.40 to 20 ft × 6 ft at £216.00, including 8 ft × 4 ft at £57.60.
Finishing options
- Eyelets: four corners, three or four along the top and bottom, one every 50 cm, or none. No extra charge. For scaffolding and fencing, choose every 50 cm so the load is spread along the edge.
- Hemming: a folded, strengthened edge. Adds £2.55 per banner.
- Cable ties: supplied with the banner. Adds £1.49 per banner.
- Pole pockets: a 3, 4 or 5 inch sleeve for hanging on a pole or bar. Adds £4.99 per banner.
- Packaging: sent folded or unfolded. No extra charge.
Artwork requirements
- Size. Build the artwork at the finished size of the banner, or to scale in the same proportions.
- Resolution. For a banner seen from 3 metres or more, 100 pixels per inch at full size is sharp and 60 is acceptable. An 8 ft × 4 ft panel is 96 × 48 inches, so 9600 × 4800 pixels is sharp and 5760 × 2880 is acceptable.
- Keep it bold. Mesh has small holes that let wind through, which softens fine detail. Use large, heavy lettering and simple images, and avoid thin type.
- Edges. Keep text and logos clear of the edges, where the eyelets and hems go.
- File. A PDF with fonts outlined or embedded, in CMYK where your software allows. Supply logos as vector artwork.
Check your file before you order with our free artwork resolution checker. The artwork size check in our banner design guide also shows whether your artwork is the same shape as the banner. Both run on your own device.
Why mesh for scaffolding
A solid banner on scaffolding catches the wind like a sail. Mesh lets air pass through, which puts less strain on the eyelets and ties. The trade-off is slightly softer colour than solid PVC. For a sheltered wall or shop front, a solid vinyl banner gives a stronger image.
Fixing a scaffold banner
- Tie the banner at every eyelet, not only the corners.
- Pull it flat without straining it drum-tight.
- Check with your scaffolding contractor before fixing anything to a scaffold.
Turnaround, delivery and collection are covered under delivery and turnaround below.
Reviews
There are no reviews yet.